Gorenje GV63315UK, Инструкция по эксплуатации

Страница: 8 / 30

1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolve s, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the con trol panel (for some Mode ls),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive sa lt.
Always use the salt intended for use with dishwasher.
The salt c ontain er is located beneath the lower basket and should be fill ed as explained
in t he foll owing:
Attention!
Only use salt spe cif ically desi gne d for t he use i n dishwashers! Every other type of
salt not speci fically de sig ned fo r the u se in a d ishwas her, espe cially table salt, will
damage the w ater sof tener. I n case of damages caused by the use of unsuitable
salt t he ma nuf act urer does not give any wa rranty nor is liable for any damages caused.
Only fil l wi th salt just b efore starting one of the co mp let e washing p rograms.
This wi ll prevent any g rains of s alt or salty wate r, which ma y have been spilled,
remaining on the bottom of the machi ne for any period of time, which may cause
corrosi on.
The rinse aid is released d uring the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rins e aids. The rinse a id dispenser is located inside the door next to the detergent dispense r.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any o ther substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Fu ll fill the salt container with water,It is normal for a small amount of water to come out of the
salt container.
A After the lower basket has been removed, unscrew and remove the cap from the salt container.
B Place the end of the funnel (supplied) into the hole and introduce about 1.5kg of dishwasher salt.
C
D After filling the container , screw the cap tightly back clockwise.
E The salt warning light will stop being after th e sa lt contain er has be en filled with sa lt.
F Immediately after filling the salt into the salt container, a washing program should be started
program Otherwise the filter system, pump or other important parts of the machine may be damaged
by salty water. This is out of warranty.
(We su ggest to use a short
).