Gorenje GC341UC, Инструкция по эксплуатации

Страница: 19 / 24

13.8.201420201717
17
Gas connection joint
A EN 10226 R1/2 connection
B Nonmetal gasket of thickness 2 mm
C Pipe extension for liquid gas
After connection check proper functioning of burners. Gas must
burn with clearly displayed blue-green flame hubs. If the flame is
not stable, increase minimum power setting. Instruct the user in
regard to burner button controls and read the instructions or use
together.

For the conversion procedure the appliance need not be
pulled out from its location.

Before starting to work on conversion, disconnect the
appliance from the mains and shut the gas inlet off.

Replace the existing nozzles of declared nominal heat input
with adequate nozzles for the new type of gas (see table).

In case of conversion to the liquid gas propane/butane, the
minimum heat input setting screw shall be tightened all the
way.

In case of conversion to natural gas, unscrew the setting
screw to arrive at minimum heat input, but never for more than
1,5 turn.

After the conversion is done, stick the new sticker with the
actual gas specifications of the appliance over the old
one.

Upon completion check the gas tightness of the appliance.
Check sealing of all joints and couplings after
connection.
Conversion to another
type of gas