GORAVE SOUL WAY
SOUND BAR
Owner’s Installation and Operation Manual
V1.0 / 03-04-2017
MORE THAN MUSIC
9
audio transmission.
b)
Play audio on the device.
c)
Adjust the volume on the device to desired level.
d)
Follow Section 4.6 to add this USB Audio Sender to the Audio Receiver’s Favorites List.
e)
After you add the USB Audio Sender to the Favorites List, press the Connect button four times to return the Soul Way into “All
Play” mode.
4.6 Add an Audio Sender to the Favorites List
Soul Way sound bars can save a list of favorite Audio Senders. If an Audio Sender is not on the favorites list, the Soul Way may not
play your audio. Go to gorave.com/support and select “Quick Start Guide” for a quick Favorites List video tutorial.
a)
To add an Audio Sender to the Soul Way’s Favorites List, connect the Audio Sender to a device and start playing audio.
b)
The LED status indicator on the Soul Way should be a dim amber or dim green to indicate that it is exploring for new Audio
Senders. Double click the Connect button on the Soul Way to search for the transmitting, non-favorite Audio Sender. The LED
indicator will flash bright amber when it discovers the Audio Sender signal.
c)
When you hear your audio playing from your loudspeakers, press and hold the Pair/Bond button for four seconds to save your
Audio Sender in the Favorites List.
d)
The LED status indicator will turn solid green to indicate audio is playing from a favorite Audio Sender.
e)
After you add the USB Audio Sender to the Favorites List, press the Pair/Bond button four times to return the Soul Way into
“All Play” mode.
4.7 “All Play” mode
“All Play” mode is the easiest way to use GoRave when you have more than one Audio Sender in your space.
After you add or remove an Audio Sender from an Soul Way’s Favorites List, press the Pair/Bond button four times to put the Soul
Way into “All Play” mode. The LED status indicator will turn red. Now the Soul Way will automatically play from any transmitting
Audio Sender in its Favorites List without having to manually press the Pair/Bond button.
Play with one Audio Sender at a time for Soul Way receivers in “All Play” mode. Disconnect the first Audio Sender when you want
a Soul Way to detect and play audio from a second Audio Sender.
4.8 Select a different Audio Sender when another is already playing
a)
The easiest way to change audio sources is to disconnect the Audio Sender from the first device, then connect and play from
a second.
b)
Activate “All Play” mode so the Soul Way will automatically play from any transmitting Audio Sender in the favorites list.
c)
To manually control audio playback from the Soul Way:
(i) single click the Pair/Bond button to switch to the next transmitting favorite Audio Sender
or
(ii) double click on the Pair/Bond button to switch to the next transmitting non-favorite Audio Sender.
4.9 Reset / Clear all Pair/Bond settings
To clear all saved Audio Senders from the Favorites List, press the Bond button six times. The LED status indicator will flash red,
the Soul Way’s Favorites List will be cleared, and volume settings reset. You may now add new Audio Senders to the Favorites List.