Hardware
basicCON 4121 – User Manual
2-65
The RGB888R Interface Module is a Grabber module for video frames
in RGB888 format.
The module has the following characteristics:
24 bits Color depth
Pixel clock frequency up to 33 MHz
4 bits for control signals
The module includes a “04628805” type 50 pole FFC socket
with 0.5mm pitch of Kyocera. There can connect a FFC foil cable and
lead out of the module, marked as “RGB Input”. The video signal is
input via this cable. All signals corresponds to 3.3V CMOS logic.
The following table shows the assignment oft the connector:
Pin
Signal
Annotation
1
GND
Ground
2
RES
Reserved, do not connect
3
RES
Reserved, do not connect
4
NC
Not Connected
5
NC
Not Connected
6
GPO
General Purpose Output
7
GND
Ground
8
Video Bit 0
9
Video Bit 1
10
Video Bit 2
11
Video Bit 3
12
Video Bit 4
13
Video Bit 5
14
Video Bit 6
15
Video Bit 7
16
GND
Ground
17
Video Bit 8
18
Video Bit 9
19
Video Bit 10
20
Video Bit 11
21
Video Bit 12
22
Video Bit 13
23
Video Bit 14
24
Video Bit 15
25
GND
Ground
26
Video Bit 16
27
Video Bit 17
28
Video Bit 18
29
Video Bit 19
30
Video Bit 20
31
Video Bit 21
2.4.24
RGB888R
