Gopel Electronic basicCON 4121 Video Dragon, Руководство пользователя

Страница: 55 / 86

Hardware
basicCON 4121 – User Manual 2-43
The DS90UR906 interface module is a Grabber module supporting the
FPD-Link II standard (Flat Panel Display Link).
It includes the DS90UBR906Q receiver of Texas Instruments.
The module has a second connection and appropriate circuitry,
enabling not only signal receiving, but also routing through.
By this, the Grabber module can be inserted into an existing system of
transmitter and receiver without changing the system itself.
The module has the following characteristics:

Backward compatible to FPD-Link I

24 bits Color depth

Pixel clock frequency up to 65 MHz
The module includes two “D4S20D-40ML5-Z” type connectors of
Rosenberger, whereof the “Input” connector receives the signals,
while the “Output” connector routes the signals through
The following table shows the assignment of the “Input” connector:
Pin Signal Annotation
1
Ground Ground
2
SD_IN_P Serial Data Input positive
3
Through_In_Out Routed through
from “Input” to “Output”
4
SD_IN_N Serial Data Input negative
The following table shows the assignment of the “Output” connector:
Pin Signal Annotation
1
SD_OUT_N Serial Data Output negative
2
Through_In_Out Routed trough
from “Input” to “Output”
3
SD_OUT_P Serial Data Output positive
4
Ground Ground
The electrical signal properties correspond to the FPD-Link standard.
2.4.13 DS90UR906