<
16
>
Power
switch
button/indicator
Power indicator description:
Steady green: The device is powered on.
Green (flashing): Indicates that the device is in the standby state.
Green off: The device is not powered on.
Power button description:
Short press the button in the boot state, the OS shuts down
normally.
Press and hold the button for 6 seconds to turn off the server.
When the power is turned on, press this button briefly to boot.
UID button/indicator
The UID button/indicator is used to conveniently locate the server to be
operated. It can be turned off or on by pressing the UID button or remote
control via iBMC command.
UID indicator description:
Blue (solid/blinking): Indicates that the server is located.
Off: The server is not located.
UID button description:
Short press this button to turn the positioning light on/off.
System
fault
indicator
Off: The device is operating normally.
Blinking yellow: It indicates that the device is faulty during
operation.
Fan failure indicator
Off: The fan is normal.
Blinking yellow: The fan has failed.
Network
port
connection
status
indicator
Corresponds to the Ethernet port indicator of the network card.
Green (Chang): indicates that the network port is connected
properly.
Off: The network port is unused or faulty.
Instructions
Corresponds to two 1GE network ports on the motherboard.
Network
port
connection
status
indicator
Corresponds to the Ethernet port indicator of the network card.
Green (Chang): indicates that the network port is connected
properly.
Off: The network port is unused or faulty.
Instructions
Содержание Purley Platform 1U
