RC32c and RC16C Operators Manual
Goodwin Electronics
D1011/v1.7 /23/10/03
Page 20
11. ERROR MESSAGES
The following error messages can be displayed. Error messages cannot be ignored, warnings can.
Error Messages
Cause
Error 1
Stored data corrupted. The parameter pages MUST be
reconfigured and new program data entered.
Error 2
Creep speed error. The encoder is not rotating or rotating two
slowly. The encoder may be faulty.
Error 4
Battery low warning. Replace as soon as possible.
Error 5
Entry into parameter pages not allowed
Error 7
RS 232 error.
