REMOTE CONTROLLER
You can control the system with the provided remote controller. Slide open and
insert two (AA / UM3) batteries
correctly so that the + and – polarities match the polarity diagrams inside the battery compartment.
z
When the batteries are exhausted, the remote will no longer operate the system. Replace both batteries with
new ones.
z
When the remote is not to be used for a long time, remove the batteries to avoid damage caused by battery
leakage and corrosion.
z
Avoid keeping the remote in extremely hot or humid locations.
z
Between remote controller and remote sensor there should be on no obstacles in the way. The remote range
is approx 8 Metres.
REMOTE CONTROL FUNCTIONS
1.
P-MODE BUTTON
2.
PROGRAM BUTTON
3.
NUMERIC BUTTONS
4.
--- BUTTON
5.
BATTERY COMPARTMENT
6.
BUTTON
7.
SKIP FORWARD BUTTON
8.
SKIP BACKWARD BUTTON
9.
STOP BUTTON
10.
PLAY/PAUSE BUTTON
POWER SUPPLY
1.
BATTERY OPERATION
(Batteries are not supplied)
–
REMOVE THE BATTERY COMPARTMENT
DOOR.
–
INSERT 8 PIECES UM-2 (C SIZE) BATTERIES
INTO THE BATTERY COMPARTMENT WITH
BATTERY POLARITY POSITIONED AS
INDICATED.
NOTE: WE RECOMMEND THE USE OF
ALKALINE BATTERIES.
–
CLOSE THE BATTERY COMPARTMENT DOOR.
2.
AC OPERATION
-
PLUG THE AC LINE CORD INTO ANY
NORMAL HOUSEHOLD AS MAINS OUTLET IN
CORRECT VOLTAGE AND THE MAINS SOCKET.
-
THE BATTERIES WILL BE AUTOMATICALLY
DISCONNECTED.
-
FOR MAINS OPERATION CONNECT THE
SUPPLIED AC CORD TO THE AC SOCKET
ON THE LEFT REAR OF THE UNIT.
CONNECT THE 3 PIN MAINS PLUG TO A
3 PIN 230VAC MAINS SOCKET.
4
