Stopping Play
1.
Press CD STOP button if you wish to stop play. The total track number which can be played will now appear
on the display.
2.
Open the CD door on the unit to remove the CD.
REPEAT
You can play one track or all tracks on the disc repeatedly.
To Repeat a Single Track
1.
Press the PROG./P-MODE button once in play, " " shows flashing on the display. The current track will be
played over and over again till you press the STOP button.
2.
To cancel repeat play, press PROG./P-MODE button until " " disappears from display.
To repeat all the Tracks
1.
Press PROG./P-MODE button twice in play, " " shows steady on the display, all tracks on the disc will
be played over and over again till you press the STOP button.
2.
To cancel repeat play, press the PROG./P-MODE button until " " disappears from the display.
To repeat the Folder (only for MP3 disc which contains more than one folder)
1.
Press the PROG./P-MODE button thrice in play, " FOLDER" shows steady on the display, the folder
which is currently being played will be repeated over and over again till you press the STOP button.
2.
To cancel repeat play, press the PROG./P-MODE button until " FOLDER" disappears from the display.
Note: Press and hold the PROG./P-MODE button during playback, the display will show track and folder number
cyclically release to show track.
PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3 99 tracks can be
stored in the memory in any order.
1.
In stop mode, press the PROG./P-MODE button, the PROG will flash and the
P01
will show on the display.
2.
Press the CD SKIP/SEARCH FORWARD button to select the first desired track to be programmed.
3.
Press the PROG./P-MODE button to enter. The display changes to show
P02
.
4.
Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5.
Press the PLAY/PAUSE button to start playback from the first programmed track.
6.
Press the STOP button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1.
Press STOP button until “PROG” disappears on the display, or
2.
Open the CD compartment lid, program will be erased.
RANDOM PLAY
Press the PROG./P-MODE button three times during play, ”RDM” appears on the display, the unit will stop to
search a track (song) randomly and start playback from this track, then select another in random order until all
tracks are played over and then stop. To cancel random function, press the PROG./P-MODE button until the
“RDM” indicator disappear on CD display.
INTROSCAN PLAY
（
for CD disc only
）
Press the PROG./P-MODE button in four times during play, “INTRO ” shows steady on the display, the unit will
start to play the first 10 seconds of music of each track , until all tracks are played over and then stop. To cancel
random function, press the PROG./P-MODE button until the “INTRO” indicator disappear on CD display.
TO SELECT A SONG WHICH TRACK NUMBER EXCEEDS 10 (for MP3 only)
To select a song/track which number exceeds 10, use the FOLD±/±10 buttons and the CD SKIP/SEARCH
FORWARD/BACKWARD button. Press and HOLD the FOLD±/±10 buttons for about two seconds each time to
skip forward/backward 10 tracks
，
then press the CD SKIP/ SEARCH FORWARD/BACKWARD button to select
desired track.
Note: Pressing and HOLDING the FOLD±/±10 buttons can skip at 10 tracks in succession.
7
