6
In the box
Inside your GDB8 receiver package you should have :
This user guide
Quick start guide
GDB8 digital terrestrial television receiver
12V DC power adaptor
Remote control remote control
Set of batteries for the handset
Aerial Loopthrough cable
SCART cable
AV Switching
If after connecting the GDB8 to your TV as shown and you do not see a picture,
press AV button on your TV remote until you see the “First Time Installation”
screen.
Over Air Download(OAD)
To ensure that your digital receiver always has the most up-to-date
information, please ensure that after use it is turned to standby. The GDB8 will
automatically power up at 3AM each day and search for any new updates
which may be broadcast and will download any relevant updates found
automatically. This operation will normally take approximately 30 seconds.
If you have an important recording to make at 3AM which must not be
interrupted, then you can disable the auto OAD search by performing the
following:
1.Press MENU button and using the UP/DOWN buttons highlight “Settings”
and press the SELECT button,
2.Use the UP and DOWN button to highlight “Configuration” and press the
SELECT button,
3.Use the UP and DOWN button to highlight “Receiver Upgrade” and press the
SELECT button,
4.Using the LEFT/RIGHT button change "AUTO UPGRADE" option from On to
Off,
5.Press SELECT and MENU and MENU to return to Normal operation.
Do not forget to re-enable the automatic OAD function after you have made
your recording by repeating the above instructions but this time selecting On
otherwise your GDB8 will not be updated if there are any OAD broadcasts.
