34
Advanced Operation (continued)
3
Pressing MENU or SELECT returns to the
timer screen and shows the new settings in
the timer event list. The event mode is
automatically set to active and you can now
return to normal viewing (press the MENU
key) and at the appointed time the receiver
will switch over to the required channel and
at the end of the event, switch the receiver
to standby.
Hint
If you are watching digital
terrestrial TV at the time the timer
event starts, a message is flashed
onto the screen announcing that
the receiver is 'switching to timer
channel' so you understand what is
happening.
Re-installation
Although your GDB8 receiver will not lose its settings or stored channels when
switched off, you may wish to re-install the receiver because you have moved to
a different area with different broadcast frequencies, you wish to reinstate a
channel previously deleted from the channel list, or you want to watch new
channels which have started broadcasting.
When the timer screen is displayed,
any event can be set to be inactive
(so it will not occur) or the channel,
times and frequency mode altered by
highlighting the event's mode button
and pressing SELECT as before.
You can exit the timer screen and
return to normal TV viewing by
pressing MENU.
Press the MENU key to display the
main menu and using the Up or DOWN
keys, highlight the SETTINGS line
and press SELECT, highlight
Installation line and press SELECT to
display the installation menu.
You can either perform a first time
installation, effectively resetting the
receiver to its ex-factory condition, or
just search for channels.
