37
APPENDIX A - SAFETY
POWER
TEMPERATURE AND MOISTURE
VENTILATION
CLEANING
HEAT AND FLAMES
LIGHTNING
REPLACEMENT PARTS
BATTERY DISPOSAL
SERVICING
The DC power adaptor of GDB8 should be plugged into a 230V to 240V AC,
50Hz supply only.
Do not leave or use the receiver in a hot, cold or humid area. Do not allow the
receiver to get wet- from drips or splashes- as this may be dangerous. Do not
place water-filled objects such as flower vases, on top of the receiver.
Slots and openings in the receiver's cover are for ventilation. Do not cover or
block them as this could lead to overheating.
Unplug the receiver before it is cleaned. Use a lightly dampened cloth only.
Do not use liquid or aerosol cleaners.
The receiver should not be placed near to naked flames or sources of intense
heat, such as an electric fire. Ensure that no naked flames sources, such as
lighted candles, are placed on top of the receiver.
Unplug your receiver from the wall socket if there is a storm or lightning, or if it
is to be unused for a long time.
If your receiver needs a replacement part, ensure the person undertaking the
repair uses parts which are specified by the manufacturer or have the same
specifications as the original part. Other parts may cause a fire, electric
shock or other hazards.
Please ensure that exhausted batteries from the remote control handset are
disposed of safety.
Ensure the person who services your receiver is qualified to do so. Do not
remove the cover yourself or you could get an electric shock.
