Goodmans G-Shot 3021Z, Руководство пользователя

Страница: 23 / 63

- 23 -
Formatting the SD Card
In most cases, you can directly use a newly purchased SD card to store pictures. But to avoid any possible
problems, it is recommended that a new SD card be formatted first before using it.
Set the dial knob to [ ] , [ ] ,[ ] ,[ ] .
When [ ] , is selected, the last image frame or the thumbnail display appears on the LCD
monitor.
102-0009 102-0009 102-0009 102-0009
ERASE ERASE
Hold down the erase button for two seconds.
Use or button to select [ ], and press ENTER button.
To reset the image number, use or button to select
[EXECUTE], and press ENTER button.
SD Card Full
If you have taken many pictures and your SD card is full, the LCD display will show a "CARD FULL" message. If this
happens, you must erase pictures from the SD card, or replace it with a brand new SD card.
Before erasing pictures, make sure you transfer them first from the SD card to your computer.
WARNING:
If the SD card contains pictures, all files, including protected picture files, will be deleted when the SD card is
formatted. The deleted files cannot be recovered. SD card cannot be formatted if it is write-protected.
To cancel formatting, select [ ] and press ENTER button.
To cancel resetting of image numbers, select [CANCEL].