Good Will Instrument GDS-3000A Series, Руководство пользователя

Страница: 328 / 417

GDS-3000A series User Manual
326
Configure the mask violation
Step
1. Press the Set up test button from
the bottom menu.
2. Press Violating Threshold to set the
number of violations that can occur
before a test status is considered.
3. Press Stop After Time
to set the test to stop
after a set amount of
time elapses.
Range
1~172,800s (infinite)
4. Press stop After
Waveform to set the
test to stop after a set
number of waveforms.
Range
1~1,000,000 (infinite)
5. Press Select Action to set how the oscilloscope
responds to test failure. User can set multiple
actions as shown in the figure below.
6. Press Action on Failure On/Off . The
above setting will be executed only
when Failure On or Off occurs.
7. Press Action on Test Completion
On/Off .