Good Will Instrument GDS-3000A Series, Руководство пользователя

Страница: 318 / 417

GDS-3000A series User Manual
316
Offset
0.4% ~ 40% (.4% steps)
Maximum and
Minimum
Position
9. To manually set the template
tolerance, press
Minimum Position
or Maximum Position and use the
VARIABLE knob to set the
absolute minimum or maximum
position.
or
Range
Voltage division range
Save Boundary
Template
10. Press Save Operation to save the
tolerance boundaries.
11. The Maximum Position tolerance will be saved
to reference waveform R1, and the Minimum
Position tolerance to R2.
12. Press Go Back to return to the
previous menu.
Start Go-NoGo
Press Enable to start the Go-NoGo test. Then the
Enable button will change to Disable. Pressing
Disable will stop the Go-NoGo test and toggle the
button back to Enable.
If the Violating setting was set to Stop, press
Enable to restart the test after it has stopped.
Start test
Stop test
Test
stopped
Results
When Go-NoGo is running, the violation/test
ratio is displayed in the bottom left-hand corner.
The first digit represents the number of violations,
and the right hand digit represents the number of
tests.