Good Will Instrument GDS-3000A Series, Руководство пользователя

Страница: 277 / 417

POWER ANALYSIS (OPTIONAL)
275
2. When amplitude profile is enabled,
you can edit it. When amplitude
profile is disabled, amplitude can
be selected and changed only in
the AWG Setup option.
Edit profile
1. Press Edit Profile from side menu.
Amplitude profile is used to test at
lower amplitudes at frequency
where the DUT is sensitive, and
test at higher amplitudes where it
is less sensitive to distortion.
2. Press Select from side
menu and select the
frequency band that
needs a customized
signal level.
Amplitude
1. Press Amplitude to configure the
amplitude of the frequency band.
Use the VARIABLE knob or
numerical keypad to input value.
2. Press Go Back to return to the
previous menu.
Range
0.01~2.5Vpp (50 ohms load)
0.02~5Vpp (High-Z load)
Linear
Interpolation
1. Press Linear Interpolation to enable
or disable generating linearly
interpolated amplitudes between
two neighboring band edges. With