Good Will Instrument GDS-3000A Series, Руководство пользователя

Страница: 317 / 417

APPLICATIONS
315
2. Press Go Back to return to the
previous menu.
Set Go-NoGo
Actions
3. Press Violating to set what action
to perform when a signal violates
the Go-NoGo conditions.
The waveform stops when the
conditions are violated.
Ignore violations and continue to
monitor the signal. Each violation
is counted.
4. Press Go Back to return to the
previous menu.
Set Go-NoGo
Source
5. Press Compare Source from the
bottom menu to set the Go-NoGo
boundary source.
Sets CH1 as the source.
Sets CH2 as the source. There are
up to four channels.
6. Press Go Back to return to the
previous menu.
Set Boundary
Tolerance
7. To set the Go-NoGo boundary
tolerance, press
Reference Mode .
Auto Tolerance
8. To set the boundary tolerance as a
percentage offset from the source
waveform, press
Auto Tolerance
and use the VARIABLE knob.
VARIABLE