11
no signal / steady full
signal displayed
- Read chapter 7.
- Make sure all devices are switched on..
- Check all cables and connections for damages.
The compass does
not work properly.
- Keep the device horizontal.
other questions
- Consult your dealer.
10 Specifications:
Input frequency
950-2150MHz
Input level min.
-40dB
Input level max.
-10dB
input impedance
75Ohm, F-Stecker
output impedance
75Ohm, F-Stecker
Power Supply
13-18V DC
Operating range (LNB gain(
52~60dB
Dimensions
128 x 68 x 28 mm
Weight
98g
Housing
plastic
11 Warranty and Liability:
• The producer grants a 2 years guarantee to a new device.
• As the manufacturer has no influence on installation, warranty of the product only
applies to the product.
• If any fault or damage is detected on your device, please contact your dealer and provide
your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will
repair the fault either on site, or send the device to the manufacturer. You make the work
of our technicians considerably easier, when you describe possible faults in detail – only
then you can be assured that faults occurring only rarely will be found and repaired with
certainty!
• The manufacturer is not liable for damages to persons or property caused by improper
installation or operation not described in this guide. This includes, among others, any
alteration and modification of the product and its accessories.
• Any use other than described in this user‘s guide is not permitted, and causes loss of
warranty, loss of guarantee, and non-liability.
• We reserve our right for misprints and changes of the device, packing, or user‘s guide.
