9
and insulating material.
• Do not use the device directly in front of the dish to avoid a wrong signal.
• Use a 5dB attenuator in the case of a LNB gain higher than 60dB.
• Avoid places with high temperatures, or humidity, or places which might come into
contact with water.
• Do not install the product close to openings of air conditioners, or at places with an
excessive amount of dust or smoke.
• Do not modify and alter the product and any accessories! Make sure you also read the
Chapter “Warranty and Liability”. Do not use any damaged parts.
• Do not use any damaged parts.
• Plug and unplug all cables slowly and carefully.
• During transport, observe the details listed in the Chapter “Specifications”, and imple-
ment measures suitable for transport, e.g. use the original package.
• For questions, defects, mechanical damages, malfunctions, and other functional
problems which cannot be resolved by this guide, please contact your dealer for repair or
replacement, as described in the Chapter “Warranty and Liability”.
• Mind chapter “Specifications“.
• Please also observe the terms of use described in the Chapter “Intended Use”.
4 Parts Package:
1 pc. SAT FINDER with digital LCD
1 pc. user manual
5 Construction:
1 Satellite: Connection to LNB
2 Receiver: Connection to
SAT Receiver
3 Compass: to find the azimuth
4 BUZZER control key (OFF is displayed when
switched off)
5 Light: LED backlight control key
6
3
ATT Reduction key: reduces the incoming
signal when too strong (4 steps) In case of the
thermometer scale shows max and the signal
strength value shows 99.
ATT is displayed at the left side of the display.
7
4
ATT Increasing key: increases the incoming
signal in a contrary way to No. 6.
ATT is displayed at the right side of the display.
8 LCD graphic display
9 adjustable volume key and additional attenuator
