45654 / 45655
Goobay® by Wentronic GmbH
Pillmannstraße 12 | 38112 Braunschweig | Germany
REV2022-04-07
V5.1aw
Wireless Quick Charger
Chargeur sans fil rapide
• Do not short-circuit connectors and circuits.
Do not operate a device if it is not in working order. In such ca-
ses, it must be secured against unintentional further use.
• Use product, product parts and accessories only in per-
fect condition.
• In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentati-
on, contact your dealer or producer.
• Avoid stresses such as heat and cold, moisture and direct
sunlight, microwaves, vibrations and mechanical pressure.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against ac-
cidental use.
Heat storage
Heat is generated during inductive charging.
• Make sure that there are no metal parts on the back of
your device (e.g. metal cover, metal plate for magne-
tic holder).
Metal heats up strongly in the induction field and can cause
damage to the product or your end device.
• Do not cover the product.
Magnetism
The product contains magnetic materials.
• Consult a medical professional before you use the pro-
duct to make sure it is compatible with implanted medi-
cal devices.
• Maintain a minimum distance of 20 cm from medical de-
vices.
• Do not operate and/or store the product near credit, debit
or other bank cards.
Tripping hazard
• Install the product so that no persons or property can be
injured or damaged, e.g. by falling, tripping or the like.
2
Description and function
2.1
Product
This product is a wireless charging pad for inductive charging
of mobile devices that support the Qi standard (e.g. smart-
phones). The wireless charging pad can be connected to a
PC, USB charging adapter or USB car charger via the USB
charging cable. To use the Quick Charge (QC) function, a
charging adapter with at least 2 A output current and QC tech-
nology is required (not included).
2.2
Scope of delivery
Wireless Quick Charger, USB charging cable, User Manual
2.3 Operating Elements
See Fig. 1.
1
Charging interface
2
Micro USB socket
3
USB-A plug
4
Micro USB plug
3 Intended use
We do not permit using the device in other ways like
described in chapter „Description and Function“ or in
the „Safety Instructions“. Use the product only in dry
interior rooms. Not attending to these regulations and safety
instructions might cause fatal accidents, injuries, and dama-
ges to persons and property.
4
Preparation
1. Check the scope of delivery for completeness and in-
tegrity.
2.
Compare the specifications of all used devices and ensu
-
re compatibility.
5
Connection and operation
1. Place the charger on a dust-free, level, horizontal surface.
2. Connect the Micro USB socket of the charger to a power
source via the USB charging cable.
This can be either a 230 V USB charging adapter, a 12/24 V
car USB charger or the USB socket of a PC. To use the full
power, a USB fast charger with at least 2 A output current
and QC technology is required (not included).
As soon as voltage is applied, the LED indicator flashes
blue for one second. In standby mode, the blue LED indica-
tor goes off.
3. Place a Qi standard compatible device on the charger.
If your device is placed correctly and is charging, the blue
LED flashes slowly. If your device is placed incorrectly or a
metallic object is detected on the charging interface, the blue
LED flashes quickly.
4. Remove your device from the charger when it is fully char-
ged.
5. Remove the cable connection after use.
6
Maintenance, Care, Storage and Trans
-
portation
The product is maintenance-free.
NOTICE!
Material damage
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry
and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7
Disposal instructions
According to the European WEEE directive, electrical
and electronic equipment must not be disposed with
consumers waste. Its components must be recycled
or disposed apart from each other. Otherwise conta-
minative and hazardous substances can damage the
health and pollute the environment.
As a consumer, you are committed by law to dispose electrical
and electronic devices to the producer, the dealer, or public
collecting points at the end of the devices lifetime for free.
Particulars are regulated in national right. The symbol on the
product, in the user manual, or at the packaging alludes to
these terms. With this kind of waste separation, application,
and waste disposal of used devices you achieve an important
share to environmental protection.
WEEE No: 82898622
8
EU Declaration of conformity
Hereby the Wentronic GmbH ensures that the
mentioned radio system type is conformed to Di-
rective 2014/53/EU. The full text of EU Declarati-
on of Conformity is available at the following Internet address:
https://www.wentronic.com/en/
1
Consignes de sécurité
Le mode d‘emploi fait partie intégrante du produit et comprend
d‘importantes informations pour une bonne installation et une
bonne utilisation.
• Lisez le mode d‘emploi attentivement et complètement
avant de l‘utiliser.
Le mode d‘emploi doit être disponible à des incertitudes et
transfert du produit.
• Conservez soigneusement ce mode d‘emploi.
• Ne pas ouvrir le boîtier.
•
Ne modifiez pas le produit et les accessoires.
• Pas court-circuiter des connexions et circuits.
Un appareil défectueux ne doit pas être mis en service. Il doit
au contraire être protégé contre toute utilisation involontaire.
• Utilisez le produit, pièces et accessoires des produits uni-
quement en parfait état.
• En cas de questions, les défauts, les dommages mécani-
ques, des ingérences et d‘autres problèmes, non récupé-
rables par la documentation, contactez votre revendeur ou
le producteur.
• Éviter des conditions extrêmes, telles que la chaleur ex-
trême et froid, l‘humidité et de la lumière directe du so-
leil, ainsi que microondes, des vibrations et de la pressi-
on mécanique.
Non destiné à des enfants. Le produit n‘est pas un jouet !
• Sécuriser l‘emballage, petites pièces et l‘isolation contre
l‘utilisation accidentelle.
Accumulateur de chaleur
De la chaleur est générée pendant la charge par induction.
• Assurez-vous qu‘il n‘y a pas de pièces métalliques à l‘ar-
rière de votre appareil (par exemple, un couvercle métall-
ique, une plaque métallique pour le support magnétique).
Le métal se réchauffe fortement dans le champ d‘induction et
peut endommager le produit ou votre appareil final.
• Ne couvrez pas le produit.
Magnétisme
Le produit contient des matériaux magnétiques.
• Avant l’utilisation, consultez un médecin pour vous assu-
EN
FR
- 3 -
Subject to change without notice. |
Sous réserve de modifications.