GONSIN DCS-3021, Руководство пользователя

Страница: 9 / 30

Front side Back side:
1. Power switch (POWER); 8. RS-485 interface (RS-485 TO CAMERA). This
interface has two pairs of connection terminals
Note: The server takes a period of time to start up.
and it is used for connecting to cameras that
Before the server is fully started up, do not operate
support SONY\PELCO-P.
the congress terminals.
9. RS-232 serial port. This interface is used for
2. Backlight LCD
connecting to a PC for software control.
Show various kinds of information (such as
10.Network interface; this interface is used to
operation mode and language) and provide a
connect to a PC or backup server.
plurality of languages to allow users to set the
system.
11.One-channel 6P interface. This interface is used
for connecting to WAP-30I (for increasing the
3.Operation buttons: up/down/left/right arrow buttons
number of listening units and simultaneous
4. OK button
interpretation units).
5. Bass adjustment knob (BASS)
12. One-channel 8P interface. This interface is used
6. Treble adjustment knob (TREBLE)
for connecting to WAP-30 (with discussion
7. Volume knob (VOL) function).
13. One group of RCA balanced audio output
14. One-channel XLR balanced audio output
15. Power interface (AC 110-220V 50Hz)
08
2.3 Installation
The congress server is 1U high, and therefore it can be installed in a 19-inch rack. It has two accompanied
brackets. Screw up the bracket fixed in two sides of the congress server, put the congress server into the rack, then
screw up it with the rack screws, as shown in the following figure:
07
Chapter 2 Congress Server
2.1 Overview
The DCS congress server GONSIN30000 is the core of a congress system. It can be connected to WAP-30 or
WAP-30I (for increasing the number of listening units and simultaneous interpretation units) as well as HD matrix,
mixer, power amplifier, and PC over corresponding interface. The server acts as a bridge to connect system
hardware and control software. It can work independently or be connected with a PC to allow operator to use the
conference management software for management and control.
Product model:
GONSIN30000
Congress server (with discussion and automatic camera tracking functions)
2.2 GONSIN30000 Functions and Indicators
2.2
.
1 Basic Functions
1. Use 2.4GHz frequency hopping technology to automatically detect 2.4GHz RF resources and use reliable
frequency hopping mechanism to avoid co-channel interference if it is combined with software.
2. Use high-efficiency digital audio compression algorithm to maximize utilization rate of wireless carriers. Mutual
interference will not be caused if multiple systems are used in a building.
3. Support 8*1/8*8 HD automatic camera tracking function.
4. Support AUTO and FIFO speaking modes.
5. Support up to four speakers at the same time (one chairman terminal and three delegate terminals).
6. Support volume/tune of congress terminals to be adjusted in batch.
7. Support congress terminals to be shut down in batch, which helps effectively reduce workload.
- + - +
OK
1 2 3 4
5
6
7
8
9
10
11
12
13
14 15
OK
DCS-3021 Congress System
2.2
.
2 Indicators