GONSIN DCS-3021, Руководство пользователя

Страница: 16 / 30

3.2.3 WAP-30
3.2.3.1 WAP-30 Wireless AP Installation
Wireless transmission is at all directions and cannot be affected by visible rays. So this wireless AP could be used
outdoors. The longest connection distance between the wireless access point and the server can reach
3
0m. The best way
is to wall hung 2
.5
m above ground.
For detailed installing requirements, please refer to chapter 4 wireless network design.
Notice: It should not have any metal within
2
meter of the installation site, otherwise, the signal transmission would
weaken to some extent
15
3.2.3.2 WAP-30 Wireless AP Installation
3.3 Functions and Indicators of Charging Case
The charging case can charge 16 batteries at the same time. It is powered by the universal power supply and
automatically matched by the voltage of the city power. Each charging grid has a charging indicator light. The
charging circuit can automatically detect the battery and control the charging process.
Notice: CHG-16 charging case can charge the DSC-3021 conference terminal. Don’t use it to charge other types of
conference terminals.
Product model: CHG-16
3.3.1 Basic Functions
1. Smart management of batteries: ensure security and reliability of charging process, manage battery capacity
and charging current, extend service life
2. Red/green LED indicator to indicate charging different states
3. Charging is implemented by an independent module with battery capacity detection function. When no battery is
inserted, the charging module does not work.
4. Up to 16 batteries can be charged at the same time; charging duration:
3.
5h
1
、
Battery grid
2
、
LED indicator (red indicates "being charging"; green indicates "charging completed")
3
、
Power interface(AC 110-220v 50Hz)
4
、
Power switch(power)
3.4 Connection of Congress Terminal
To connect the congress server with wireless terminals, use an 8PS-03/05/10/20/40 extension cable to connect the
8P interface (female connector) of the server to a WAP-30 AP, with one male connector of the cable connected to
the congress server and the other male connector to the AP. Theoretically, the maximum distance between the AP
and a congress terminal is 30m.
Refer to the following figure:
3.3.2 Indicators
16
DCS-3021 Congress System
( rack mounting ) ( ceiling mounted or wall-mounted)
Connect the next ap