Golz FS 240 SE, Руководство по эксплуатации

Страница: 14 / 47

FS 240 SE
Operating instructions
- 14-
02822410998
5006580-00
5. Installation
Information: Unconditional observe the owner’s manual of the engine manufacturer!
Danger: Never touch rotating parts like blade shaft or blade while operating!
Danger: Rotating parts may pull in clothing! Wear tightly clothing!
Danger: Down coming parts can cause injuries to the operator!!
Place the machine on an even, firm and stable ground. Have the working area well lightened. Keep
the working area clean, cluttered areas invite injuries. Observe the manufacturer’s information for
connecting power and water supply. Lay all lines or cables that damages will be prevented.
Mount the blade to the manufacturer’s odds (Observe the min. flange-Ø; use only original screws or
nuts). Use only blade diameters which are allowed by the manufacturer.
The working area is reserved only for the operator. Keep unauthorized persons out of the working
area . Make sure the operator always has well sight to the working area. He always has to intervene in
the working process.
Never operate the machine without mounted safety devices. Check the blade is well fastened before
beginning to operate. Check the correct water flow to the blade. If harmful or explosive stuffs like dust,
milk-of-lime arise while cutting, observe local regulations .
If there is a risk that, during the cutting process, material particles can be accelerated outwards, wear
safety goggles.
Danger: Demolition parts can cause injuries to the operator while cutting!
When travelling on public roads, ways and places always observe the valid traffic regulations and, if
necessary, make sure beforehand that the machine is in a condition compatible with these regulations.
After operating secure the machine against unintentional moving. If there is a risk due to increased
noise exposure during the cutting process at the workplace, wear ear protection.
Danger: The sound pressure may exceed 85 dB(A)!
Appropriate to the application of the machine it could be necessary to wear further protective equip-
ment.
Danger: Down coming parts at the building site can cause injuries to the operator!