Golz FS 240 SE, Руководство по эксплуатации

Страница: 20 / 47

FS 240 SE
Operating instructions
- 20-
02822410998
5006580-00
To make it easier to change the multiple V-belt, raise the machine slightly by means of the hand crank.
Before you continue to work, press the emergency stop switch and pull off the power plug.
Loosen the counter nut M10 (Pos. 1) and slightly turn off the turnbuckle nut (Pos. 2) in order to remove
the tension from the multiple V-belt.
Remove the flange protection (Pos. 3) and open the V-belt protective hood (Pos. 4) in order to remove
the loosened multiple V-belt (Pos. 5) from the V-belt pulleys.
Position the new multiple V-belt on the V-belt pulleys and tighten it by turning the turnbuckle nut (Pos.
1) in the opposite direction until the required V-belt tension is reached. Tighten the counter nut (Pos.
2) again.
Shut the V-belt protective hood again and fit the flange protection again. If during operation, the V-belt
tension decreases to such extent that there is a slip between the multiple V-belt and the V-belt pulleys,
the multiple V-belt must be retightened.
6.3 Maintenance plan
1. Flange bearing of the spindle shaft: Clean from time to time, lubricate.
2. Shaft: Clean from time to time, lubricate.
3
5
4