GÖLZ FB 20 P, Оригинальная инструкция по эксплуатации и список запасных частей, Страница: 13 / 24

FB 20 P
- 13-
5006194-00
BA-E
Electric tools outdoors and in wet areas: Mobile tools which are used outdoors should be connected to the mains
supply using a residual-current circuit breaker or the like for added safety. This is particularly important when
working with freehand tools. If there is a water supply, you should use an isolation transformer and a voltage
supply of 115 V; please specify in your order.
For outdoors work, only use extension cables, which are approved for this purpose and marked accordingly.
Be vigilant at all times. Watch your work. Proceed sensibly. Do not use the tool if you are not concentrating fully
on what you are doing.
Important:
Safety equipment (such as overcurrent protection devices, undervoltage trips, safety couplings etc.) are tools but
do not offer guaranteed safety. As a responsible manufacturer we tailor these tools to each other so that they
offer the best possible protection. But without the care and caution of the use, these tools may even cause
damage it they are not used properly. Have the slip couplings, in particular, checked during the quarterly
inspection to ensure that it is correctly adjusted and functions properly. This inspection should be conducted by
the manufacturer or an authorised service outlet and documented.
Check the machine every day for signs of damage, conduct a visual inspection:
Before reusing the tool, carefully check the safety equipment or slightly damaged parts to ensure that they offer
perfect and proper function. Check that all moving parts function correctly, that they do not jam and that none of
the parts are damaged. All parts must be correctly fitted and satisfy all the conditions to ensure the perfect
operation of the tool. Damaged safety equipment and parts must be repaired or replaced properly by a specialist
service contractor. Do not use any tools, which cannot be switched on and off using the switch. Pay particular
attention to ensuring electrical safety: Cables? Plugs? Switches? Do all the components satisfy safety
regulations?
Repairs may only be completed by trained personnel. Before being used for the first time and after all repair
work, the safety of electric tools must be checked by an electrician pursuant to VBG 4, § 5. This inspection must
also be conducted and documented at regular intervals – at least once per year.
Please note that as the operator you are responsible for complying with any additional regulations. For example if
electric tools are used in a wet and/or damp environment, the regulations of the ”Stone and Earth” Professional
Association must be satisfied.