GÖLZ Bridge Saw, Оригинальное руководство по эксплуатации, Страница: 33 / 86

8 Operating
33 / 86
8.3 Preparations for launch
To use the machine safely and for its intended purpose, the following requirements must be met:

The machine stands securely

The water tray is filled with clean, clear water

The machine was checked for damage, loose screw connections and for completeness

The water supply is functional

The direction of rotation arrow on the cut-off wheel and the cut-off wheel protective cover must
correspond

A suitable blade, which meets the optimum conditions, must be fitted
8.4 Switch on
The machine is switched on via the main switch. To do this, open the emergency stop function flap
and press the green button.
NOTE!
Check after start:

The cooling water must be conveyed in sufficient quantity from the water pump to the
cut-off wheel and discharged on both sides.Ist dies nicht der Fall, Maschine sofort
stoppen!
The motor is equipped with a thermal protection which is activated in case of a too high
temperature rise.
Before restarting the machine, wait about 30 minutes until the motor has cooled down.