GÖLZ Bridge Saw Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 86

GÖLZ Bridge Saw Скачать руководство пользователя страница 32

8

Operating

32 / 86

8

Operating

8.1

Safety instructions for operation

Personnel



Instructed personnel

Personal protective equipment



Protective clothing



Protective gloves



Safety shoes



Ear protection



Safety goggles

8.2

Intended working position of the operator

The operator stands in front of the machine near the emergency stop switch, so that he can push the
cutting head back and forth by means of the corresponding handle, and also to trigger the
emergency stop at any time in emergency situations.

WARNING!
Risk of injury due to improper operation!

Improper operation can lead to serious injuries.

-

Operation may only be carried out by trained personnel authorised by the operator.

-

Before carrying out any work, ensure that the safety devices are correctly installed and
function properly.

-

Never override safety devices.

-

Always pay attention to order and cleanliness in the working area! Loose objects,
components, workpieces, tools and cleaning equipment lying around are sources of
accidents.

DANGER!
Danger to life from electric current!

Touching live parts leads to death. Damage to the insulation or individual components can be life-
threatening.

-

If electrical components are defective, switch off the power supply immediately and

arrange for repair.

-

Keep moisture away from live parts.

«
...
30
31
32
33
34
...
»

Содержание Bridge Saw























































































Отзывы:

Нет отзывов