8
DOOR PANEL INSTALLATION
Adjusting the door panel communication volume:
If after starting the system the door panel audio volume seems inadequate, follow these steps:
- Call an apartment.
- The call is received in the apartment. Establish communication by pressing the push button
on the monitor.
- Next, press the push button used to call the apartment for 3 seconds until a number of con
#
rmation tones are
heard and the door panel communication LED
starts to blink.
- Each press on the same call button will increase the door panel volume and LED blink speed.
.
There are 5 volume settings and the blink speed of LED
will increase for each. Slow to fast blink - low to
high volume. After reaching
“
setting 5
”
, that is, maximum blink speed and volume, the next setting is
“
setting 1
”
, that is, minimum blink speed and volume (carousel mode).
- To save the volume setting keep the push button used to call the apartment pressed until a number of
con
#
rmation tones are heard and the door panel communication LED
turns off.
Adjusting the vocal synthesis volume:
If after starting the system the vocal synthesis volume of the door panel seems inadequate, follow these steps:
- Within 10 seconds of connecting power to the door panel press any call push button on the door panel.
- Keep the call push button pressed until the vocal synthesis volume is heard and door panel LED
starts to
blink.
- Each press on the same call push button will increase the vocal synthesis volume and the blink speed of LED .
There are 5 volume settings and the blink speed of LED
will increase for each. Slow to fast blink - low to
high volume. After reaching
“
setting 5
”
, that is, maximum blink speed and volume, the next setting is
“
setting
1
”
, that is, minimum blink speed and synthesiser volume (carousel mode).
- To save the volume setting keep the push button used to call the apartment pressed until a number of
con
#
rmation tones are heard and the door panel communication LED
turns off.
Selecting the vocal synthesis language:
To activate the vocal synthesis of the door panel, follow these steps:
- Set dip 6 of the sound module's con
#
guration dip switch to ON (see page 6), a
con
#
rmation tone will be heard.
- The desired language can be set using the sound module's P1 push button.
- Each press will change the language. Continue doing this until the desired language is
heard.
-
.
Once
#
nished set dip 6 on the con
#
guration dip switch to OFF
A con
#
rmation tone will be heard.
P1
STAINLESS STEEL NEXA MODULAR GB2 VIDEO SYSTEM KIT – VILLAS
