5
CE-610
: 125( ) x 140( ) x 56( ) mm.
W
H
D
embedding box
1650
1850
1450
Make a hole in the wall to position the top of the door panel at a height of 1.65 m.
Hole dimensions:
The door panel has been designed to be used under most environmental conditions. It is however advisable to
take extra precautions to prolong its service life (shields, covered areas, etc.).
To obtain optimum video door entry system image quality, avoid direct contact from light sources (sunshine,
street lights, etc.).
Positioning the embedding box:
DOOR PANEL INSTALLATION
Preparing the cable entry:
Break through the hole to allow the entry of the cable
into the bottom section of the embedding box.
Pass the cable through the hole made in
.
the embedding box
Embed the box and ensure that it is level and flush.
Once embedded, remove the protective
stickers from the screw holes.
STAINLESS STEEL NEXA MODULAR GB2 VIDEO SYSTEM KIT – VILLAS
