7
PORTER'S EXCHANGE DESCRIPTION
On-Off push button. If the "Protected Mode" function is enabled (page 48), it shall be
necessary to introduce the user code to switch on the porter's exchange.
If the handset is on the craddle no function is activated. If not, allows to make
an intercom call to the other porter's exchange (if exists).
The intercom function is described on page 60.
If the handset is on the craddle allows to see the picture from the master door panel.
If not, allows to establish audio and video communication with the door panel
that has been configurated with the autoswitch-on function. This function is
disabled if a communication is already established.
During standby status and with no dependence of the handset position, activates
the lock release of the master door panel. During call reception and communication
progresses allows the lock release activation of the calling door panel.
Lock release activation is only available when systems with door panel(s).
Regardless of the handset position, activates the 'OA1' output relay (see page 45).
D
escription of the identification label.
For an easiest repair or replacement of an existing
porter's exchange, fill the indentifying label
information.
PRINCIPAL: master exchange (page 48).
M. PROTEGIDO: protected mode enabled (page 48).
CAPTURE PANEL: capture door panel calls (page 48).
2 TABLA: direct call code enabled (page 49).
PANICO: show panic calls (page 49).
RETENCIONES: memorize missed calls (page 49).
DIRECCION: porter's exchange dial code (page 48).
F
unction push buttons.
00000000000
.xx
PRINCIPAL
CAPTURA PLACA
PÁNICO
M. PROTEGIDO
RETENCIONES
2ª TABLA
DIRECCIÓN
ATENCIÓN
Alta tensión. No abrir la tapa.
Manipular sólo por personal
del servicio técnico.
WARNING
High voltage. Don't open cover.
Handle only bu technical service.
