25
S
ystems with two porter's exchanges.
The maximum number of porter's exchanges in one system is two; one of them must be
configured as master and the other one as slave, as it is described on page 48.
Calls made from monitors or telephones by using the lock release push button will be always
received on the master porter's exchange. If the porter's exchange is switched off,
the incoming will be transferred to the slave unit (night operation). The incoming door panel
calls will be also received on the master exchange. However, each porter's exchange can
have its own address direct call code (see page 48).
Tekna Plus and Platea Plus monitors can select to which porter's exchange the call will be sent,
by using the second auxiliary push button. This function requires an internal modification
in the monitor, as it is described on the door panel instructions manual.
. If the call
from an apartment, the display of the master porter's exchange will show a new missed call.
CETK-590 Plus porter's exchanges have intercom facility between two porter's exchanges
If during an intercom communication a call is
will be heard on the master unit handset, the picture
the porter's exchange display will show the message
the OK key of the master unit to establish communication with the
or press the door release push button to activate the lock release
. To
enable this function, link the INT terminal of the units, as it is shown on the enclosed diagram.
To establish an intercom communication, lift the handset and press the intercom push button;
acoustic tones will be reproduced on the handset confirming the call is in progress or
that the other unit is communicating. The display of the caller porter's exchange will show
To
of the called unit: both porter's exchanges displays
the messages
or
. The display of the
exchange will show the message
.
calling to concierge
system is busy
concierge incoming call
door incoming
called porter's
establish communication lift the handset
will show the message
communication
.
made from the door panel, acoustic tones
will appear and
; press
door panel,
has been made
call
OPTIONAL CONNECTIONS
A
+ _
D
Malla
V
in
V
out
INT
CN3
A
+ _
D
Malla
V
in
V
out
INT
CN3
ancel
?
!
.
-
,
a bc 2
d ef 3
j k l 5
mno6
pqrs7
t uv8
wxyz9
+ - 0x *
g hi 4
ancel
?
!
.
-
,
a bc 2
d ef 3
j k l 5
mno6
pqrs7
t uv8
wxyz9
+ - 0x *
g hi 4
CETK-590 Plus
CETK-590 Plus
