STARTING RECOMMENDATIONS
NOTES FOR SYSTEMS WITH DOOR PANELS
2
INTRODUCTION
INDEX
1
O
Monitors and telephones should be programmed from the door panel, as it's explained on the
corresponding instruction manuals. Once the programming is done, make a call from each
apartment to the porter's exchange: the display will show the assigned code.
O
Use this instructions manual to program the porter's exchange and for system wiring purposes.
O
Refer to the door panel instructions manual for troubleshooting hints.
O
On systems with general entrance door panel(s), the porter's exchange(s) must be also general
(common to all the internal buildings). Consequently, the porter's exchange cannot be connected
in a internal building (for privated use of the internal building), as it's shown on the schematic
diagrams (pages 31 to 34).
Introduction..........................................1
Index ...................................................1
Updated features from 5.00 version .........1
Notes for systems with door panels ...........2
Starting recommendations......................2
System operation.............................3 to 4
Porter's exchanges ...................................
Wall connectors ............................5 to 6
Description ........................................7
Function push buttons..........................8
Identifying label ..................................8
Adjustments .......................................9
Porter's exchange programming ................
Programming menues ...............10 to 17
Repertory text writing..........................18
Fast repertory search .........................18
Power supply installation.......................19
Power supply linking.............................19
T-940 Plus telephone ...............................
Description ......................................20
Function push buttons........................20
Telephone installation........................21
Programming ...................................22
Optional connections ..............................
Telephones intercommunication .........23
Door bell push button connection........23
Two porter's exchanges systems ...........24
Installation diagrams ...............................
Audio installation ......................25 to 26
Video installation with coaxial .....27 to 28
Video installation w/o coaxial .....29 to 30
General entrance installation .....31 to 34
First of all we would like to thank and congratulate you for the purchase of this product
manufactured by Golmar.
The commitment to reach the satisfaction of our customers is stated through the ISO-9001
certification and for the manufacturing of products like this one.
Its advanced technology and exacting quality control will do that customers and users enjoy with
the legion of features this system offers. To obtain the maximum profit of these features and a properly
wired installation, we kindly recommend you to expend a few minutes of your time to read this manual.
UPDATED FEATURES FROM 5.00 VERSION
O
Management of up to 255 internal buildings of 1,000 apartments each.
O
New programming menu structure.
O
Direct Call Code that allows to use a different call code from the one recorded on the monitor or
telephone (page 12).
O
'Repertory:insert' function, that allows to keep sorted the repertory content (page 16).
O
Transmission of the repertory content to other panels or porter's exchanges through the
installation wires (page 17).
O
Text edition using the keypad as a mobile phone (page 18).
O
Previous software versions are fully compatible, except when the Direct Call Code is
activated or the number of internal buildings is bigger than 99.
O
O
O
O
Do not use excessive force when tightening the power supply connector screws.
Install the equipment without the power connected. Disconnect from power before any system
modification. Check that the input voltage is lower than 230Va.c.
Before to connect the system, check all the connections. Do always follow the enclosed
information.
Each time the power supply is restarted, or after a modification, the system will remain blocked
during 30 seconds.
