3
SYSTEM OPERATION
- To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being made
and
LED
will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating that
the door panel
a call is being made. At this moment, the apartment's monitors receive the call. If another apartment is called by mistake,
press the button for the correct apartment and the first call will be cancelled.
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists) without the
visitor knowing and icon
displayed on the screen
. To view the image from slave monitors 2 or 3,
is in green color
press
the image. If the call is not answered within 45 seconds,
one of the buttons of the monitor to display
the door
panel LED
will turn off and the system will become free.
-
the push button below
shown
To establish communication, press
off-the-hook icon
on the screen or (if the monitor is
the 'ART 4TH LITE' you can also lift the handset). The icon
displayed on the screen is in red color, door panel LED
will turn off and the led
turn on
n 'ART 4H LITE'
will
. If the monitor is a
with icon
on the front, make sure that the
hearing aid is between 15 and 25 cm away from the monitor to ensure maximum audio quality during communication
with the door panel. (
with the 'ART 4TH LITE' monitor, communication with hearing aids must be by establishing
Note:
communication with the handset).
-
the push button below
shown on the
is pressed
Connection will last for 90 seconds or until
on-the-hook icon
screen
or (if the monitor is the 'ART 4TH LITE', hang up the handset only if communication has been established by lifting the
handset). When communication ends,
LED
will turn off and the system will become free. If vocal
door panel
synthesis is enabled, a 'Communication is finished' message will indicate that the call is over.
-
or
,
push button below of
displayed on the screen
To open door
of the door panel press the
corresponding icon
during the call or communication processes: one press will activate the lock release for
seconds and
3
the door
panel LED
will also turn on for
seconds. If vocal synthesis is enabled, a 'Door
open' message will be indicated
3
is
on the door panel.
-
6 to 22
Detailed operation of the monitor is described on pp.
.
CHARACTERISTICS
- Hands-free monitor ("ART 4TH/LITE" monitor, also allows communication with a handset).
- 4,3" TFT colour screen.
(New menu with white background)
.
-
with simple installation non-polarised 2 wires
Monitor
(
bus).
- The
monitor interacts with hearing aids equipped with T-mode, making
ART 4H LITE / ART 4TH LITE (in the handset)
,
conversation between apartment and door panel easier.
- Function buttons and selection of menu functions.
- Push button
for access (standby monitor) and selection of menu function.
- User menu (new menu with white background).
- Installer menu (new menu with white background).
-
menu (new menu).
Image and communication settings
-
Available with
and later of ART 4 LITE G2+, ART 4H LITE G2+ monitors,
V.05
(New menu with white background):
V.04
and later of ART 4B LITE G2+and with
and later of ART 4TH LITE G2+ monitor.
ART 4 LITE G2+/ ART 4H
V.01
Important:
LITE G2+ monitors with
and earlier refer to the quick guide supplied with the corresponding monitor.
V.03
- Output to auxiliary call repeater (maximum 50mA/12Vdc).
- "HZ" input for calls from apartment front door.
Up to 6 monitors/ apartments with push button "HZ" activated at
Important:
the same time (with system and monitors in standby).
- Push buttons for Door release 1 and 2.
- Notification leds.
- Configuration switches.
- ART 4/LITE & ART 4H/LITE monitor with
& later and ART 4B/LITE with
& later (
general door panels
V.04
V.05
accepts
’special codes’).
- ART 4TH/LITE monitor with
& later (accepts general door panels ’special codes’).
V.01
1
2
COMMUNICATION WITH HEARING AID (ART 4TH LITE/G2+ MONITOR ONLY)
T
The handset of the ART 4TH LITE G2+ monitor enables communication with hearing aids equipped with T-mode,
making conversation possible (inductive loop).
Set the hearing aid switch to position T.
Remember:
ART
/G2+
4
MONITOR
LITE
