Customer Service Support: 1800 224 278 |
www.goliath-outdoor.com
Page 18 of 23
CHOKING HAZARD
- Small Parts. Not for children under 3 years.
ADULT ASSEMBLY REQUIRED
- Contains small parts, sharp points and sharp edges.
1. Preparing the trampoline mat. Unfold the Trampoline Mat (5). Have the Springs (6) and Spring Hook Tool
(7) ready for assembly.
2. Divide the round jumping mat in 8 equal parts.
Attach the Springs to the V-rings. Pull the
Spring Hook Tool towards the frame and
connect the Springs into the frame receiving
holes.
3. When connecting the Springs, always connect
the Springs opposite to each other to get an
even result in tensioning the Trampoline Mat.
4. Lay the net on the jumping mat, spread out the
net base. Ensure the net is fully unraveled and
not twisted.
Locate the direction for the net entrance.
Align the eyelets at the net bottom to the 8
springs installed in Step 1 & 2.
5. Undo the 8 installed springs. Thread the eyelets
through V-rings on the mat, and reattach the
springs to the frame as shown below.
