Goldwing RC 9975000007-0, Руководство пользователя

Страница: 33 / 38

All contents copyright 2015, GOLDWING RC Version 1.0, Dec 2015
7 Final Radio System Installlation
7.1 Whether you 72 MHz systems or the newer 2.4 GHz systems, proper radio installation and
care is vital to the safe and reliable operation of your aircraft. Follow the manufacturer’s
instruction for installation guidance of receivers and batteries paying attention to factors
such
as vibration isolation, adequate cooling, and clearances.
7.1 Mount your reciever(s) securely in a location which provides a clean and maintenance free
solution to your setup. All servo wires should be neatly routed and secured in place so they
will not come loose or flop around during flight.
7.2The fuselage ply sides provide space to mount your switches just below the canopy. Mount
your switches according to the manufacturer’s instructions and route your wires safely and
securely as above.
7.3 Your receiver battery(s) can be mounted in a variety of locations depending on your
balance needs. Regardless of where you mount your batteries it is vital that they are very
secure with no possibility of coming loose. Use double sided velcro to hold the batteries from
sliding around and then use zip ties or velcro straps to secure them tightly in place.
7.4 Servo and battery leads are the life blood of your aircraft. Make sure all wires are top
quality and connectors are tight and display no loose pins or frayed wires. Servo clips are
provided in the kit for your convenience. These servo clips can even be glued to the wood
structure using CA if desired.