Goldwing RC 9975000007-0, Руководство пользователя

Страница: 18 / 38

All contents copyright 2015, GOLDWING RC Version 1.0, Dec 2015

Spares bag(Two spare wing bolts)
Construction
1. Rudder Assembly
1.1 Locate rudder, a control horn and base plate. Rudder is driven by push-rod, servo bay
is on the right side of the fuselage.
1.2 Locate the slot for control horn on rudder, remove the covering over the slot with
heated soldering iron or sharp hobby knife, and make sure you do it on the right side of the
aileron. Insert control horn into base plate then into the slot, trace the edge of base plate with
hobby knife then remove the underlying covering.