Goldwing RC 9975000007-0, Руководство пользователя

Страница: 25 / 38

All contents copyright 2015, GOLDWING RC Version 1.0, Dec 2015
2.9 The following is a picture of correctly installed tail wheel assembly.
3 Wing Assembly
3.1 Locate two wings, ailerons are pre-hinged in factory.
3.2 Locate the slot for control horn on aileron, remove the covering over the slot with heated
soldering iron or sharp hobby knife, and make sure you do it on the bottom side of the aileron.
Insert control horn into base plate then into the slot, trace the edge of base plate with hobby
knife then remove the underlying covering.