Goldwing RC 9975000007-0, Руководство пользователя

Страница: 30 / 38

All contents copyright 2015, GOLDWING RC Version 1.0, Dec 2015
4.5 Locate the slots for elevator servo, remove covering. Connect wire extension to your
servos before feeding the wire into fuselage. Install servo with screws supplied by servo
manufacturer.
4.6 Use your radio to set the servo center position and install the large control horn onto the
servo. Assemble the control rod and ball links and adjust the control linkage for proper
geometry. When satisfied, screw the ball link to the servo arm and control horn. KUZA 1.25”
aluminium CNC servo arm is recommended for elevator control, the servo arm should be as
close to perpendicular to the control rod as possible while the elevator is at neutral. Double
check all screws, bolts and nuts to assure proper installation and operation without binding.