Goldweb GW-WR301N, Руководство пользователя

Страница: 64 / 98

GW-WR301N/GW-WR301ND 300Mbps Wireless Router User Manual
61
The following table describes parameters in this page:
Field Description
Service Name Enter the service name.
Service User
You can select Any or Single address .
Any : Allow everybody in the user network to use the service.
Single address : Enter the IP address of the network card on
the PC. Then, the service is applied only on the specific
network card of the PC.
Service Type
Indicate the protocol used at the triggering port. You can select
TCP/UDP , TCP , or UDP .
Triggering
Starting Port
The first port to which an application sends a connection request.
All relevant ports can be open only after connection is established
at this starting port. Otherwise, other relevant ports are not open.
Triggering
Ending Port
Set the end port of the triggering port range.
Connection
Type
You can select TCP/UDP , TCP , or UDP .
Starting Port
When the connection to the triggering port is successful, the
corresponding ports are open and the application can send
consequent connection request to the open ports.
Ending Port Set the end port of the triggering port range.
After setting, click
Apply to add the rule of port triggering.
6.5.3 UPnP
By using the Universal Plug and Play (UPnP) protocol, a host at the LAN side can
ask the router to realize specific port conversion, so that an external host can
access resources on the internal host when necessary. For example, if MSN
Messenger is installed on Windows ME and Windows XP operating systems,
UPnP can be used for audio and video conversations. In this way, functions
restricted by NAT can work properly.