Gold's Gym Platinum GGBE6958.1 страница 7 Скачать руководство пользователя

Страница: 7 / 44

Attach a Small Foot Plate (100) to a Base (1)

with two M4 x 16mm Screws (82).

Orient a Large Foot Plate (51) as shown. Attach

the Large Foot Plate to the Base (1) with two

M4 x 16mm Screws (82).

Insert four M10 x 65mm Carriage Bolts (83) up

through the Base (1). Place tape over the bolt

heads to hold them in place.

Repeat this step with the other Base (1).

Note the orientation of the Large Foot Plate

(51).

Before beginning assembly, make sure

that you understand the information in

the box above.

100 83

To make assembly easier, carefully read the

following assembly tips:

•

To hire an authorized service technician to

assemble the weight bench in your home, call

1-800-445-2480.

• Assembly requires two persons.

•

Because of its weight and size, the weight bench

should be assembled in the location where it will

be used. Make sure that there is enough clear-

ance to walk around the weight bench as you

assemble it.

•

Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

•

For help identifying small parts, use the PART

IDENTIFICATION CHART on pages 5 and 6.

• The included grease and the following tools (not

included) may be required for assembly:

two adjustable wrenches

one rubber mallet

one standard screwdriver

one Phillips screwdriver

Assembly will be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

ASSEMBLY

Содержание Platinum GGBE6958.1













































Результаты поиска

Содержание Platinum GGBE6958.1

Отзывы:

Похожие инструкции для Platinum GGBE6958.1

Бренды по названию

Популярные бренды

Gold's Gym Platinum GGBE6958.1, Руководство пользователя

Результаты поиска

Содержание Platinum GGBE6958.1

Отзывы:

Похожие инструкции для Platinum GGBE6958.1

Бренды по названию

Популярные бренды