28
66
128
129
128
115
129
110
109
66. Insert a Pad Tube (129) through the Leg Lever
(110). Slide a Foam Pad (128) onto each end of
the Pad Tube.
Attach the other Pad Tube (129) in the same
way.
Attach the Long Pad Tube (115) to the Front
Leg (109) in the same way.
68
112
142
95
141
82
68. Attach the Curl Bumper (141) to the Curl Bar
(112) with an M4 x 16mm Screw (82).
Attach the Curl Pin (142) to the Curl Bar (112)
with an M4 x 10mm Screw (95).
114
113
148
67
67. Attach the Curl Pad (114) to the Curl Post (113)
with two M6 x 19mm Screws (148).
69.
Make sure that all parts are properly tightened.
The use of all remaining parts will be explained in
ADJUSTMENT, starting on page 29.
Before using the weight bench, pull each cable a few times to make sure that the cable moves smoothly. If a
cable does not move smoothly, find and correct the problem.
IMPORTANT: If the cables are not properly
installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on pages 32
and 33 for proper cable routing. If there is any slack in the cables, you will need to remove it by tight-
ening the cables. See MAINTENANCE on page 34.
