20
38. Wrap the Low Cable (72) over a 90mm Pulley
(58). Attach the 90mm Pulley to the Top Frame
(16) with an M10 x 46mm Button Bolt (96) and
an M10 Locknut (79).
79
96
16
72
38
58
40.
Locate the Long Cable (54).
Route the Long
Cable over a 90mm Pulley (58), and upward
through a Swivel Arm (32) and the Left Upright
(3). Attach the 90mm Pulley inside the Swivel
Arm with an M10 x 53mm Button Bolt (147), two
M10 Washers (84), two 6mm Spacers (75), and
an M10 Locknut (79).
79
40
84
75
84
32
3
58
54
147
75
39. Attach the Low Cable (72) to the U-bracket (47)
with an M6 Washer (86) and an M6 Locknut
(80).
See the inset drawing. Do not over-
tighten the Locknut; it should be threaded
onto the end of the Low Cable so that only
two threads are showing below the Locknut.
39
72
47
86
80
72
80
47
