25
58. Attach the Leg Bumper (135) to the Front Leg
(109) with an M4 x 16mm Screw (82).
Attach the Front Leg (109) to the Bench Frame
(107) with two 3/8" x 3" Hex Bolts (105), two
M10 Washers (84), and two 3/8" Locknuts
(150).
See step 57. Tighten the M8 Locknuts (78).
82
135
58
109
150
84
105
107
78
57
108
143
107
57. Attach the Bench Stabilizer (108) to the Bench
Frame (107) with two M8 x 76mm Carriage
Bolts (143) and two M8 Locknuts (78).
Do not
tighten the Locknuts yet.
56. Attach two Plastic Foot Plates (50) to the Bench
Stabilizer (108) with four M4 x 10mm Screws
(95).
108
50
50
95
56
95
59. Apply grease to an M10 x 82mm Button Bolt
(106). Attach the Leg Lever (110) to the Front
Leg (109) with the Button Bolt and an M10
Locknut (79).
Do not overtighten the Locknut;
the Leg Lever must pivot easily.
59
110
106
Grease
79
109
