Gold's Gym Interactive 890 Скачать руководство пользователя страница 6

Страница: 6 / 36

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons.

Set the treadmill in a cleared area and remove all packing materials.

Do not

dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of

the walking belt or the shipping carton. This is normal and does not affect performance. If there is lubricant on top

of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver

adjustable wrench

, rubber mallet

, and scissors

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly.

Note: If a part is not in the hardware kit, check to see if it is preattached

to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-

bly. Extra hardware may be included.

#8 x 3/4" Screw (1)–4

3/8" Nut (9)–5

#8 x 1" Tek Screw (4)–4

Base Foot Spacer

(11)–2

3/8" Star Washer

(10)–10

3/8" x 3/4"

Patch Bolt (8)–2

#8 x 1/2" Screw

(2)–12

1/4" x 1/2"

Bolt (3)–2

3/8" x 2" Bolt (5)–5

3/8" x 1 1/4" Bolt (7)–4

3/8" x 4 1/2" Bolt (6)–4

1. With the help of a second person, carefully tip

the treadmill onto its left side. Partially fold the

Frame (57) so that the treadmill is more stable;

do not fully fold the Frame yet.

Cut the shipping tie securing the Upright Wire

(97) to the Base (95). Locate a tie in the indi-

cated hole in the Base, and use the tie to pull

the Upright Wire out of the hole.

Attach a Base Foot (93) to the Base (95) in the

location shown with a #8 x 1" Tek Screw (4) and

a Base Foot Spacer (11). Then, attach another

Base Foot (93) with only a #8 x 1" Tek Screw (4).

Hole

Содержание Interactive 890





































Результаты поиска

Содержание Interactive 890

Отзывы:

Похожие инструкции для Interactive 890

Бренды по названию

Популярные бренды

Gold's Gym Interactive 890, Руководство пользователя

Результаты поиска

Содержание Interactive 890

Отзывы:

Похожие инструкции для Interactive 890

Бренды по названию

Популярные бренды