5
- TAPE MONITOR
This switch, when pushed down, allows the monitoring of the TAPE machine
connected to the TAPE INPUT and TAPE OUTPUT back panel connector.
- SELECTOR
This selector allows to choose the source from one of the 5 inputs.
- REMOTE-CONTROL
The SRP2 uses a volume motor-driven potentiometer which can be adjusted by the
remote controller provided for increasing (+) or decreasing (-) the sound level.
In addition a "MUTING" control with soft stop and start is available through the
remote control which acts on the potentiometer.
The additional "MEMO" key on the remote allows to pre-program a standard level to
which the potentiometer will return when the unit is powered on or when the "RESET"
key is pressed.
Attention :
If the potentiometer position you want to memorize is above the
potentiometer's half position, it won't be memorized and a value of ¼ will be
memorized instead. This is provided by the software as a safety to avoid very high
level memorization by accident with potential danger for the speakers the next time
the unit is turned on.
