Page 6
Using the optional RSP-33
The RSP-33 is a remote setpoint adjustment and
can be mounted up to 500 feet away from the SP-
33 or SP-33D control. Be sure to move the
Setpoint Selection jumper to the "External" posi-
tion when using the RSP-33. See included in-
structions for mounting information. The RSP-33
uses a 3 conductor connection to the SP-33/33D
controls. A 3 position screw terminal block on the
Operation
Operation
Operation
Operation
Operation
(Continued)
(Continued)
(Continued)
(Continued)
(Continued)
RSP-33 is labeled "1", "2", and "3", similar to the
screw terminal located under "R" and "C" on the
SP-33/33D controls. Using 3 conductor wire,
connect each pair of similarly marked screw ter-
minals. Refer to the diagram below.
Adjustments
Adjust the setpoint and differential to the desired
settings.
Accessories
Accessories
Accessories
Accessories
Accessories
Contact you Goldline Dealer for these accesories:
• TD-30 - digital display
• TDA-30 - digital display with alarm
• RSP-33 - remote setpoint
• full line of sensors
