11
V 19-02
OPERATION AND MAINTENANCE
Models with sliding button set power by sliding (14) or by pressing or (5), (4) or
dots of (14)
Only one heat plate choose key (2) available at the same time. That is only one
radix point (13) can display.
Stop Heat Plate
1.
The corresponding radix point (13) will display, when the heat plate working.
2.
Set (4) to "0" and the heat plate stops working.
3.
In the case of radix point (13) display, pressing (5) and (4) at the same time,
the heat plate stops working fast. (Models with sliding button do not have this
function)
1.
When the heat plate stops working, it will show "H"
(waste heat) if the temperature for the surface of
panel is higher than 60"C.
2.
If the temperature for the surface of panel is lower
than 60"C, it will show "0".
3.
It will be no display when the appliance shut down.
Settings of Double Circle or Triple Circle Heating Zone
(Double Circle or Triple Circle is customized)
4.
Users can choose the size of heating zone based on
the dimension of the pan. (A: inner circle b: inner,
middle circle c: inner, middle, outer size)
Start or stop double circle or triple circle heating zone
1.
Press (2) corresponding radix point (13) 1 display.
2.
Set power (1-91evel)
3.
Double circle setting: press (6) to start outer circle and LED (10) light.
4.
Press (6) Again to stop outer circle and LED (10) light
Triple circle setting : ( if equip triple circle radiant heater), based on the setting of
double circle, pressing (6) to open the outer circle and LED (15),at that time, inner,
