10.
Teach Wireless Fail.
Please try again.
This is usually caused by a button being held down for more than 3 seconds,
falsely triggering the Teach Wireless mode. It can also be displayed if the Aqua
Logic is not in the Teach Wireless mode. If the Aqua Logic is in Teach Wireless,
then the radio signal may be too weak—try moving closer to the Aqua Logic
main control unit base receiver.
11.
Display Error 1
call 888-921-7665
Display Error 2
call 888-921-7665
Display Error 3
call 888-921-7665
An internal problem has occurred in the wireless remote display/keypad. Re-
move the display/keypad from the wall mount base (see diagram on page 2) and
write down the model number and serial number. Call the Goldline Tech support
department (Monday through Friday, from 8AM to 8PM eastern time) to find out
how to obtain a replacement wireless remote display/keypad.
8
