Bellavista Signature
Italian Prestige Rigid Turntable
Positioning the Bellavista Signature
Your BELLAVISTA SIGNATURE turntable has been designed for sheltered Hi-Fi systems. It must be protected from any
eventual variations in temperature and humidity. Avoid using in the vicinity of radiators or other strong heat sources,
electrical and electronic motors, switched on mobile phones etc.
The location in proximity of other audio components is not theoretically critical, but you should nevertheless pay attention
to this.
The levelling and positioning on a solid, firm board, as explained in the previous chapter, are fundamental elements to
ensure the maximum sonic performances.
PLEASE NOTE.: Check that the correct acceptance voltage is indicated on your turntable. Incorrect voltage will prevent
your BELLAVISTA SIGNATURE from working properly and could risk causing irreparable damage.
WARNING: Never turn on the turntable while any parts are disassembled as contact with the high voltage inside the
BELLAVISTA SIGNATURE turntable could be fatal.
33 1/3 rpm or 45 rpm
By positioning the belt in the smaller groove of the synchronous pulley motor, the BELLAVISTA SIGNATURE turntable be
set at 33 1/3 rpm, while in the larger groove it will be set at 45 rpm. This positioning must be carried out manually.
The pulley may be covered by a Jewellery Gold Plated cover available as optional.
Turning on
The On/Off switch is located on Acrylic board inserted in an anodised aluminium collar. Once the switch has been turned to
ON (1) the turntable will start working at the speed hand selectioned.
Specifications & Technical features
wow e flutter : 0,03
Rumble : -80 db
Speed : 33 1/3 and 45 RPM +/- 0,05% - rapid manual changeover
70 shores elasticity black drive belt
Dimensions: width 470 mm; depth 360 mm; height 170 mm.
BABELE MM cartridge 3,0mV; 470ohm
Positioning
–
Operating
-
Specifications
6
