Bellavista Signature
Italian Prestige Rigid Turntable
Contents of Packaging
-
1 BLACK POLISHED TURNTABLE PLINTH MADE OF ACRYLIC.
-
1 CARBON STEEL TEMPERED POLISHED SPINDLE.
-
1 PLATTER IN BLACK SATIN EXTRUDED POLYVINYL WITH 9 GOLD PLATED WEIGHTS
-
1 70 Shore ELASTICITY DRIVE BELT
-
1 RECORD ANODIZED ALUMINIUM CLAMP
-
1 OIL VESSEL FOR PLATTER SPINDLE
-
INSTRUCTION BOOK AND WARRANTY CERTIFICATE
Construction features
-
The BELLAVISTA is rigid turntable that, like all the turntables of the Goldenote line, uses a plinth made in black high-
density polished acrylic obtained via “polymeric melting The black plinth has 3 aluminium height-adjustable feet with a
semi-conical shape featuring central grooves to ensure greater insensitivity to vibrations. Each foot has a recessed
spike may be used to couple rigidly the turntable on its shelf.
-
The turntable platter is in “extruded” polyvinyl, an ideal very deaf dampening material. Below the platter are 9 gold-
plated brass weights, which increase the peripheral inertia of the platter and thus further improve the rotational
regularity and stability.
-
The spindle is 80mm long made with C40 steel rectified & polished to achieve super high-level tolerances. A large
longitudinal groove is located on its axis, which allows the lubricating oil to run in constant manner.
-
The longer spindle eradicates any pendulum effect and distributes the inertial energy along its entire axis, completely
annulling any type of lateral friction.
-
When the turntable is new the spindle will tend to “clean” any residual dirt in the bearing. In this way even the tiniest
residual friction built up after only a few dozen hours operation will be completely eliminated.
-
The bearing that houses the spindle is made entirely in bronze and has a thrust washer made of
ARNITE
® located on
the bottom that allows for:
-
Perfect coupling.
-
Adjustment of the VTA carried out directly on the turntable plinths.
-
The possibility of eliminating virtually every type of friction that could build up during the years with
conventional bearing/spindles.
-
Moreover, the bearing is threaded on the outside in order to be tightly anchored to the board of the turntable on its
own axis. The bearing is locked onto a brass ring support specially designed to obtain a perfect flat coupling.,
-
The clamp that is made of aluminium alloy chosen for its excellent sound performance.
-
The motor, which is AC (synchronous) 24 pole with an extremely high coupling coefficient and very low noise, is
moved by a custom made capacitor. The performs the innovative HDM (Highly Dampened Motor) system to drastically
reduce vibrations
-
The pulley is enable fast 33/45 manual convenient switch -
N.B.: acrylic and polyvinyl are inert, especially rigid materials that make them ideal for absorbing vibrations. With their
extremely elevated technical and sound characteristics these materials are easily subjected to small surface scratches.
Particular care must therefore be paid to clean the platter and the turntable with a very soft cloth. Avoid the use of any
type of solvent. Despite not making use of mats, the platter will not ruin new vinyl records and creates a perfect coupling
with it.
Contents
of
Packaging
-
Construction
features 4
